THR RFID READER
| Part number: |
LF40 THR
LF40 THR
HF40 THR
HF40 THR |
TLH-U1K-0R50-SM-0010
TLH-K1K-0R50-SM-0010
THH-U1K-0R50-SM-0010
THH-K1K-0R50-SM-0010 |
Interface USB
Interface PS2
Interface USB
Interface PS2 |
- Handheld reader with PS2 or USB connection
- Replacement for Barcode scanner
- Prompt information in textdocument or input field
- Ready for immediate use
- available in LF (LF40 THR) and HF (HF40 THR)
For users who wish to replace Barcode by RFID we offer the XF40 THR, an easily operated RFID reader to move transponder data to a PC on standard interfaces. The RFID reader HF40 THR is available with either a USB 2.0 or PS2 interface. When using USB, the device is directly connected to the PC, while in order to connect it via PS2, a keyboard is linked.
Pressing a button initiates reading. Proper identification is confirmed by an audible signal and flashing LED.
Acquired data are transfered on the PS2 or USB interface to the PC, where they can be shown and further processed in any entry field or a text document.
Configuration of the RFID reader is by a setup button. Settings can be altered at the push of a button and presented in an onscreen text document. Data are displayed in ASCII or hex format.
The XF40 RFID reader THR is available with a PS2 or USB 2.0 interface.
Specifications
| Antenna |
Frame antenna |
| Dimensions (without cable) |
ca. 165 x 110 x 80 mm (6.5 in. x 4.3 in. x 3.2 in.) |
| Weight |
220 g (7.8 oz.) |
| Operating temperature |
0°C to +50°C (32°F to 122°F) |
| Storage temperature |
10°C to +60°C (14°F to 140°F) |
| Housing material |
ABS |
| Protection mode |
IP30 |
| Power consumption |
Operating voltage 5V+/-5% |
| Transponder data |
Frequency 134,2 kHz / 13,56 MHz |
| Reading range |
100mm (3.9 in.) |
For more information on our RFID products contact us via email at sales.rfid@brooks.com or call +49-9279-991 561.
Previous Page
Back to RFID Readers
Next Page
  
|